FEATURES:
TopMaxII is a high-speed universal device programmer for USB 2.0 PC-interface. It programs a 64Mbit (AM29LV641) flash memory in 42 seconds. This is a true low-price production oriented system. The TopMaxII meets the demands of today's programming solution for lab and production line applications.
PRODUCT HIGHLIGHTS
· High-speed Universal Programmer
· Support USB 1.1 / 2.0 Port in PC
KEY FEATURES
Software
· Auto search device select function supports E(E)PROMs & Microcontrollers.
· Device insertion test identifies improperly inserted device before programming.
· Gang Program Mode allows programmers up to 8 units as concurrent programming
system. (External START key allows TopMaxII to operate in stand-alone mode)
· Check for incorrect device insertion, backward, incorrect position, and poor pin contact.
· Device Operations: Read,Blank check, Program, Verify, Checksum, Data compare,
Security, Auto(blank check- program-verify), Option Bit program.
· Display programming parameters and optional bit information on the screen. · Set
device/buffer address ranges before programming devices.
· Extensive on-line F1 help system provides text and graphics.
· User-changeable programming parameters.
· Built-in editor for both buffer date and test vectors.
· Support Binary and all hex files (POF and JEDEC, Intel Hex, Motorola S Records,
Tekhex , straight hex, hex-space, Extended Tekhex, and others, automatic file type
recognition) with Load,Edit, and Save commands.
Hardware
· One on-board FPGA for extremely fast communication.
· Supports real low-voltage support : 5, 3.3, 2.7,1.8, 1.5 volt for programming power.
· Detects all pin locations for poor or damaged pin contacts.
· External START key allows production programming mode.
· Internal universal power supply,110-240 VAC (no separate power supply required in
foreign country).
· Current limiting protects hardware circuit from improperly inserted or defective chips and
operation errors.
· Standard 48-pin ZIF(Zero Insertion Force) socket accepts both 300mil and 600 mil
DIP devices.
· True universal pin driver hardware.
· Support a high-speed USB2.0 port for PC interface.
· Support a standard IEEE-1149.1 (JTAG) port
· Hardware diagnostic program exams all socket-pin drivers before using programmer.
DEVICES PROGRAMMED
· M25Pxx, MX25Lxx, S25LFxx, SST25VFxxx
· NAND Flash Memory Samsung K9Kxxx, K5Axxx, K5Fxxx, M-System MDOC-256 /
512 / 1G / 2G Toshiba TC58xxx St-Micro NAND01G / 02G / 04G
· 28Fxxx, 29Fxxx, 38Fxxx, 29LVxxx, 26LVxxx, 29GLxxx, 29ALxxx, 29Wxxx, 36xxx,
32HFxxx, 34VFxxx, 37VFxxx, 39SFxxx, 39VFxxx, 45LFxxx, 49LFxxx, 50FWxxx
· 27xxx and 27Cxxx series, from 16 Kbit to 32Mbit with 8-bit/16-bit · EEPROM
27Exxx, 28xxx , and 28Cxxx series
· 256 Kbit to 32 Mbit 28Fxxx, 29Fxxx, 29Cxxx, 29BVxxx, 29LVxxx, 29Wxxx, 49Fxxx
series (1.5, 1.8, 2.7, 3.3, 5.0, or 12 Volt) · 24Cxx, 24Fxx, 25Cxx, 59Cxx,
EPC1/1213/1648, and 93Cxx
· 27Sxx, 7Cxxx, 71xx, 74Sxx, 87Sxx, 82Sxx,
· ispLSI(10/20)xx, ispGAL22V10, ispGDS1(2)x, LC40(41)xx M4Axxx series
· PALs, PALCEs, GALs 16V8, 20V8, 22V10, 20RA10, 26V12 series
· DS12xx, DS13xx, DS15xx, DS16xx series · PEELs 153, 173, 253, 273, 18CV8,
20CG10 series
· EPLDs PLCxxx, PLSxxx, PLUSxxx, Epxxx, EPCxxx, EPMxxx, PLDxxx, 5Cxxx,
85Cxxx series
· ATF16/20/22Vxx, ATV750/1500/2500 · MACH1xx/2xx/4xx, and xxx-SP series
· MAX5000, MAX7000 series
· 8741, 8742, 8748, 8749 series · 87C51/52, -FA, -FB, -FC, '528, '652, '654, '54,
89Cxx, 89Sxx, 89LVxx, 89Cxxxx, DCF85xx, 85(87/89)LPCxxx, PXAxx series
87C751/752 · ST62xx, ST7xx, ST9xx, ST10xx series
· XC17Sxxx, 17Vxxx, 72xx, 73xx, XCF01 / 02 / 04 series
· PIC12Cxxx, PIC16xxx, 17xxx, 18xxx series
· MC68705, MC68HC705, MC68HC711, MC68HC908, MC9S08
· Z86Cxx, Z86Exx series
DEVICES TESTED
· TTL type : 54, 74(S, LS, L, H, HC) series
· CMOS type : 40, 45 series
· Dynamic Memory : 4164 - 1MBit
· Static Memory : 6116 - 6256
· User definable test pattern generation
TECHNICAL SPECIFICATION
Dimension:
· Module: 11.0 (L) x 7.25 (W) x 2.5 (H)
· Weight: 3.25 lbs
· Socket: Textool 48 pin ZIF standard.
SYSTEM REQUIREMENT
· TYPE: 386, 486, Pentium or compatibles. PS/2, Portable(notebook) computer.
· A hard disk drive (4 Megabytes) is recommended for software installation / set up.
· PC RAM size: 512K of conventional memory
· I/O PORT: USB 1.1 or 2.0 port
· OS: WINDOWS 95 / 98 / 2000 / NT / XP or greater
SAFETY STANDARD
· CE compliant
STANDARD ACCESSAORIES
· Power Cord
· USB Cable · Software CD and User's Guide
Click Here to return to top of page
|
Single Site Programmers
